布瑞斯克还原研磨剂

还原研磨剂

FINISH POLISH COMPOUND

产品介绍：

还原研磨剂含有高分子量树脂，可形成保护层，并具有优异的汽车漆保护性。 它可以保护汽车油漆表面免受磨损，老化，氧化和酸雨腐蚀。 具有良好的上光和抛光效果，防水和更高的光泽耐久性。

Finish Polish Compound contains high formula resin, can form a protective layer and excellent in car paint protection. It can protect the car paint surface from scuffing, aging, oxidation and acid rain corruption. With a good glazing & polishing effect, waterproof and higher gloss durability. The contents have a very high proportion among all the ingredients.

使用方法：

在应用产品之前，彻底清洁需要抛光的车漆表面并使表面始终保持凉爽。 在使用之前摇匀。高速抛光机：
1.在涂漆表面直接涂抹少量产品。
2.在产品保持湿润的情况下，用抛光垫抛光2“x 2”的区域，直至达到所需的光泽度。
由手或低速抛光机：
1.使用湿润的抛光海绵或抛光盘，在表面涂上轻薄的均匀涂层。
2.允许干抛或湿抛。
3.用干净柔软的抛光布擦拭。
 
紧急处理：
1.如果不小心接受或溅入眼睛，立即用大量清水冲洗或去看医生。
2.如果皮肤有敏感现象，请用肥皂和大量清水清洗。

警告：
1.在阴凉处使用。*好在常温下研磨，以避免涂漆表面过多，砂粒过多，影响抛光效果。
2.远离高温和火源。
3.不使用时请盖紧盖子。

远离儿童和动物。

USAGE DIRECTIONS:

PAINTED SURFACE SHOULD BE CLEAN & COOL TO THE TOUCH BEFORE APPLYING PRODUCT. SHAKE WELL BEFORE USE.

HIGH SPEED BUFFER:
1.Apply small amount of product directly on the painted surface.
2.While product remains wet, buff a 2”x 2” area with a polishing pad until desired gloss is achieved.

BY HAND OR ORBITAL BUFFER:
1.Apply a light even coat to surface, using a moist applicator pad or orbital bugger.
2.Allow to dry to a haze.
3.Remove with a clean, soft polishing cloth.

EMERGENCY TREATMENT:
1.If careless take it or splash into the eyes, rinse immediately with plenty of water or go to a doctor.
2.If there is sensitive skin phenomenon, clean it with soap and a large number of water.

CAUTION:
1.Use it in shady and less sand place. It’s better to grind in normal temperature to avoid overheating painted surface and too many sand, impacting polishing effect.
2.Keep it away from high temperature and fire place.
3.Please put back the cap tightly when not use it.

KEEP AWAY FROM CHILDREN AND ANIMALS.